齿科种植体

图片及说明为本厂所有，

无良抄袭下载翻版必究！

特性

应用领域:   种植

材    料: 超高防锈高硬度不锈钢, 钛, 钛合金, 高防锈不锈钢

产品描述

LZQ是一家生产各种牙科种植工具的OEM代工工厂，例如，基台/转移杆, 平行针, 扳手, 集屑钻, 取骨器，深度计， 压板, 螺丝起子, 丝锥/丝攻, 先锋钻 ，骨科钻针 ,等等。

我们也可以为客户生产成套手术工具。

可依要求生产不同刃部材料类型（陶瓷类、钨钢类、超高防锈高级品不锈钢类(AA)、钛及钛合金类、常规标准防锈高耐磨不锈钢(A)......等系列）

❈必要可带穿透&不穿透，不同等级加工的中空、空芯内孔加工。

空芯内孔加工等级(与材料等级和刃口加工等级无关)：

① AA级:    带孔原生料+纯镜面空芯内孔研磨

   (空芯内孔▼▼▼▼ &R0.01)(AAA)

   (成本很高,不常用)

② AA级:   带孔原生料,CFDA标准常规

   空芯内孔(AA)(成本较高,不常用)

③ 电火花EDM加工AA&A级料+空芯内孔研磨

   (空芯内孔研磨等级▼▼&▼▼▼等级不同，

   成本也不同）（A&AA)(成本高,不常用)

④ 深孔钻打孔AA&A级料空芯内孔(受限于内孔

   径与孔深度的比例,常规内孔径x（30～40）倍左右

   的孔深度）（B）（成本低，但需批量加工）

⑤ 电火花EDM加工AA&A级料空芯内孔,内孔

   相对粗糙些（C）（成本低，常规常备）

Characteristics

Application domain: for  implantology

Material: Ultra high anti-rust & high-hardness stainless steel, titanium, titanium alloy, high anti-rust stainless steel

Products Description

LZQ is an OEM factory for all kinds of dental implant tools, such as Abutment/Transfer , Parallel Pin, Wrench , Chip Collection Drill , Bone Fetcher，Depth gauge, Drill Key， Screwdriver, Tap , Lance Drill ，Bone Drill Point ，ect.

We can produce a whole kit of tools for customers’ surgical cases.

The cutting edge can be produced with different materials (ceramic, carbide, superhigh anti-rust and high wear resistant stainless steel (AA), Ti, Ti alloy, generally anti-rust and high wear resistant stainless steel (A) ... series)

With or without penetration, hollow & hollow core inner hole process with different grades.

Hollow core inner hole process grade (independent of material grade & edge process grade):

①AA grade:  raw material with hole + pure mirrow

   grinding of hollow core inner hole (hollow core inner

   hole ▼▼▼▼ &R0.01) (AAA) (high cost, not commonly used)

② AA grade:  raw material with holes, CFDA

   standard hollow core inner hole (AA) (relatively high cost, not commonly used)

③ Electrical discharge machining (EDM) process AA & Agrade material + hollow core inner hole grinding (hollow core inner hole grinding grade ▼▼& ▼▼▼▼Different cost for different grade) (A&AA) (high cost, not commonly used)

④ Deep hole drilling AA&A grade material hollow core inner hole (limited by the ratio of the inner hole diameter & hole depth, conventional inner hole diameter x hole depth (30~40) times approximately) (B) (low cost, but requires batch processing)

⑤ Electrical discharge machining (EDM) processing AA & A grade raw material hollow core inner hole, the inner hole is relatively rough (C) (low cost, regular stock)

Angulated Titanium Abutment

Implant cover screws

Healing post