压板，弯头压板

特性

应用领域:   种植

材    料:   超高防锈高硬度不锈钢,钛,钛合金,高防锈不锈钢

类型

开口, 闭口

产品描述：

LZQ是一家生产各种牙科种植扳手的OEM代工工厂，例如，压板，平行针, 扳手, 螺丝起子, 丝锥/丝攻, 先锋钻 ，骨科钻针, 基台/转移杆,等等。

我们也可以为客户生产成套手术工具。

（超高耐磨不锈钢 A） （淬硬处理HRC64°±2°断面）

常规标准防锈、超高耐磨不锈钢，具有超高的耐磨耗（超高硬度）性能及常规标准的防锈、耐腐蚀性能，相应一般不锈钢具有2~3倍的使用寿命，切削刃切割锋利性保持时间超长。

无标示下5%中性盐雾实验（ ASTM   B117）符合CFDA常规标准时间后无生锈现象，如重复使用、手术后建议能及时清洁烘干处理，应用范围广，可生产极为复杂、高精密的柄部形状及成型的超锋利刃部结构。

LZQ为特殊、非标、异型难加工类类产品进行中、大批量的生产，尽量不做单规格、小批量和标准的产品，因为单规格小批量生产无法摊销生产相应的高品质要求的工夹具、冶具、模具、砂轮的成本。而且如果没有准备好，制作出相应的工装夹具，生产出来的产品也不会很理想。当然，也要看产品的类别和规格来判定。而标准品的生产和一般的非标准品生产对我们公司的生产成本是差不多的，如φ12.0与φ12.218对我公司的生产成本是接近的，而对Sandvik、Widia……是有较大的差距。所以对于特殊、非标、异型、新产品的中、大批量生产，我们具有极大的竞争力，如果标准品是大批量订购的，我们也可以组织生产，但性价比和竞争力相对会较弱些，贵公司销售的利润空间也会较小些。

Drill Key

Characteristics

Application domain:   Implant

Material:   Ultra high anti-rust & high-hardness stainless steel, titanium,

titanium alloy, high anti-rust stainless steel

Type:

Open type, closed type

Products Description

LZQ is an OEM factory for all kinds of dental implant wrenches, such as, Drill Key，Parallel Pin , Wrench , Screwdriver , Tap , Lance Drill ,Bone Drill Point , Abutment/Transfer, etc.

We can also produce a whole kit of tools for customers’ surgical cases.

(Ultra-high wear-resistant stainless steel A)

(hardened HRC64° ± 2° Section)

Rust-proof, ultra-high wear-resistant stainless steel of conventional standard, with ultra-high wear resistance (ultra-high hardness) performance and conventional standard rust prevention, corrosion resistance, with 2~3 times longer lifetime comparing with that of the general stainless steel, and could make the cutting edge cutting sharpness last for a super-long time

Unmarked, with 5% Neutral salt spray test (ASTM B117), it doesn't rust after CFDA standard time. For repeated use, it is recommended to clean and dry in time after surgery. Wide range of applications and can be used to produce extremely complex, high-precision shank shapes and profile ultra-sharp edge structures.

LZQ often produces non-standard, special-shaped, high precision products which are difficult to machine in medium and big batch, but rarely in a small number for single dimension standard ones, because the cost of jig, fixture, mould and grinding wheel is quite high, and if without the mould, it is difficult to make an excellent item. However, it depends on the type and the dimension of the required products. Besides, in our company, the cost of standard products and that of the non-standard is similar, such as ?12.0 and ?12.218, but it is not for other companys, like Sandvik, Widia.This is why we are competitive in producing special, non-standard, special-shape goods. However, regarding to a big order, we also produce the standard products. But the cost-performance ratio and the competition are quite low, and also profit of the sale is lower for your company.