弯月刨刀
图片及说明为本厂所有，
无良抄袭下载翻版必究！
特性
应用领域: 用于关节镜内窥镜
材 料: 超防锈高硬度不锈钢,陶瓷,一般不锈钢
产品描述
LZQ是一家生产各种刨刀的OEM代工工厂，例如，内窥镜/关节镜刨刀 , 骨科钻针, 取骨器 , 钻头，等等。我们也可以为客户生产成套手术工具。
我们使用不锈钢和陶瓷材料。
我们可以根据客户提供的任意图纸或者样品来生产任何刨刀，而且性价比很高。
可研磨多种的刃口方式/方向角度
高抗冲击高韧性钨钢、超高防锈高硬度不锈钢、超锋利刃、镜面研磨
头部段内外超高精密配合,间隙0.010~0.015mm内，以保证高精密度之切割功能。
特殊超长管（200～800）mm之间系列的，内刀内管连接尾管处建议采用锥度过渡至（Φd-0.20）～（Φd-0.60）mm之间系列（可参考常规常备高强度尾管系列规格选择&批量定制尺寸），以增加尾管处内外单边间隙的加大，以避免因过长内外壁易干涉之问题。
定制需注明：
1.上系列规格的总长度均可依要求定制
2.以上只图示刨刀头部位置的内外径尺寸(头部刃外径尺寸,可依选择组合及配合要求精研磨至所需的尺寸公差,以超高精密内外刀配合)
3.选好齿型（样本没有的齿型需批量才能定制或来图来样咨询）
4.注明所需整套的详细的内、外规格、总长度及精研磨的公差要求……
Meniscus Cutter
Characteristics
Application domain: for arthroscopy endoscope
Material: Super-high rust-resistant high-hardness stainless steel,
ceramics, general stainless steel
Products Description
LZQ is an OEM factory for all kinds of shaver blades, such as Endoscopic/Arthroscopic Shaver blade , Bone Drill Point , Bone Fetcher , Drill Bit , ect.
We use the material of stainless steel and ceramic.
We are capable to produce any shaver blades according to drawings or samples provided by customer with a favorable cost-performance.
We can grind many types of cutting edge and angle direction.
High-impact high-toughness tungsten steel, ultra-high anti-rust high-hardness stainless steel, ultra sharp edge, mirror grinding
The inside and outside of head parts are with ultra-high precision matching, and the clearance is within 0.010 ~ 0.015mm, to ensure high-precision cutting function.
For special super long tube (200～800)mm series, taper transitions to size series between (Φd-0.20)～(Φd-0.60)mm is recommended to adopt at the inner blade inner tube linking tail pipe (The conventional regular high-strength tail pipe series specification can be reference of selection & Mass customized sizes), which can add the increase of single-side clearance at inside and outside of the tail pipe, to avoid the easy-to-make-an-interference problem caused by overlength of internal and external wall.
Remarks needed for customization:
The overall length of the series specifications above can be customized according to customers’ requirement.
This only shows the ID & OD of the shaver blade cutting edge position (Cutting edge OD will be according to customers' preferential
combination, match up the requirement to finish grind to required tolerance, with ultra-high precision cooperation of inner tubes and outer tubes)
3. Choose the tooth profile. (For tooth profile that is not in our catalog, we can customize according to customers' drawings or samples but only with batch qty)
4. Need to know the detailed specifications of outer tube and inner tube, such as diameter, total length and tolerance requirement of fine grinding.
