关节镜

图片及说明为本厂所有，

无良抄袭下载翻版必究！

特性

应用领域:    用于关节镜内窥镜

材    料:   超防锈高硬度不锈钢,陶瓷,一般不锈钢

产品描述

LZQ是一家生产各种刨刀的OEM代工工厂，例如，内窥镜/关节镜刨刀 , 骨科钻针 , 取骨器 , 钻头，等等。我们也可以为客户生产成套手术工具。

  我们使用不锈钢和陶瓷材料。

  我们可以根据客户提供的任意图纸或者样品来生产任何刨刀，而且性价比很高。

超高防锈高耐磨高抗冲击高韧性不锈钢（AA）（HRC54°±2°断面），内外刃口锋利性保持时间超长,（耐磨耗性能）使用寿命是传统的AISI304L不锈钢产品的60～100倍以上，并可使刃口长时间保持超锋利状态。

内外刀均为CNC高精密磨床反复精研磨加工,所以头部的内外配合间隙为0.010~0.015mm之间的精密型，手术中切割无毛刺、毛边、毛点残留，属高端精密型

  LZQ为特殊、非标、异型难加工类类产品进行中、大批量的生产，尽量不做单规格、小批量和标准的产品，因为单规格小批量生产无法摊销生产相应的高品质要求的工夹具、冶具、模具、砂轮的成本。而且如果没有准备好，制作出相应的工装夹具，生产出来的产品也不会很理想。当然，也要看产品的类别和规格来判定。而标准品的生产和一般的非标准品生产对我们公司的生产成本是差不多的，如φ12.0与φ12.218对我公司的生产成本是接近的，而对Sandvik、Widia……是有较大的差距。所以对于特殊、非标、异型、新产品的中、大批量生产，我们具有极大的竞争力，如果标准品是大批量订购的，我们也可以组织生产，但性价比和竞争力相对会较弱些，贵公司销售的利润空间也会较小些。

Arthroscopy equipment

Characteristics

Application domain:   for arthroscopy endoscope

Material:  Super-high rust-resistant high-hardness stainless steel,

            ceramics, general stainless steel

Products Description

LZQ is an OEM factory for all kinds of shaver blades, such as Endoscopic/Arthroscopic Shaver blade , Bone Drill Point , Bone Fetcher , Drill Bit, ect.    

   We use the material of stainless steel and ceramic.

    We are capable to produce any shaver blades according to drawings or samples provided by customer with a favorable cost-performance.

  Ultra-high rust-proof, high wear-resistant, high-impact & high-toughness stainless steel (AA) (HRC54°±2°section), The inner blade and outer blade sharpness retention time is super-long. And lifetime (wear resistance) is 60～100 times higher than that of the traditional AISI304L product,which can make the cutting edge stay super sharp for a long time.

  The inner blade and outer blade are finish-grinded repeatedly by CNC high precision grinding machine, so the head internal and external cooperation clearance is between 0.010~0.015mm, which is the precision type. The cutting is free of burrs and wool residue. It is a high-end precision type.

LZQ often produces non-standard, special-shaped, high precision products which are difficult to machine in medium and big batch, but rarely in a small number for single dimension standard ones, because the cost of jig, fixture, mould and grinding wheel is quite high, and if without the mould, it is difficult to make an excellent item. However, it depends on the type and the dimension of the required products. Besides, in our company, the cost of standard products and that of the non-standard is similar, such as ?12.0 and ?12.218, but it is not for other companys, like Sandvik, Widia.This is why we are competitive in producing special, non-standard, special-shape goods. However, regarding to a big order, we also produce the standard products. But the cost-performance ratio and the competition are quite low, and also profit of the sale is lower for your company.